Short answer: for 2026 hotel projects, the strongest OYD Textile sofa fabric picks sit between 400 and 620 GSM, led by two heavy constructions — OYD3229 (woven, 620±10 GSM, 90% polyester / 10% acrylic) and OYD3235 (chenille, 600±10 GSM, 80% polyester / 14% acrylic / 6% cotton) — with OYD1825, OYD3618, OYD2992 and OYD3626 covering mid-weight, velvet-look and lighter-weight seating. All six are quoted at 142±2 CM width and can be supplied with easy-clean (water-repellent / stain-resistant) finishing and a fire-retardant option. Every model number, weight, width and composition below is taken from OYD Textile product data; nothing is estimated.

Hotel and contract buyers rarely get to choose upholstery on appearance alone. By the time a project reaches the decision stage, the fabric list has already been filtered for cleanability, fire-safety documentation and supplier reliability. What usually remains unresolved is narrower and more practical: which weight, construction and finish combination actually fits the seating area being specified.

This ranking covers six OYD Textile upholstery fabrics that can carry easy-clean and fire-retardant finishing, ordered by verified specification and by fit for high-traffic hospitality interiors. The ranking logic is stated openly, so a specifier can re-rank the same list against their own project conditions.

The Hospitality Spec Problem: Two Requirements That Pull in Opposite Directions

Hospitality upholstery has to satisfy two demands that rarely move together. The first is operational: seating in lobbies, bars and restaurants is soiled, cleaned and used on a daily cycle, so the fabric must release stains easily and hold its appearance. The second is regulatory and aesthetic: fire-safety performance has to be documented, and the finished sofa still has to look like a design decision rather than a safety measure.

The failure mode is predictable. A buyer selects on hand feel from a small swatch, approves the color, and leaves weight, width, composition and finishing unspecified. Those four fields are the only ones that can be verified before production, and they are also the fields that determine whether the fabric survives the first two years of service in a public area.

That is why this ranking is built on specification first. Weight is the fastest filter for duty level, construction determines how the surface behaves under abrasion, composition affects color consistency and hand feel, and the finishing package determines whether "easy clean" and "fire retardant" are real delivered properties or verbal promises.

Industry Background: Why Easy-Clean and FR Finishes Moved Up the 2026 Spec Sheet

Three market signals explain why performance finishes are now treated as baseline requirements rather than upgrades.

• Scale and material mix. The global sofa market is estimated at USD 244.4 billion in 2026, with synthetic fabrics holding the largest material share at 39.8% (Grand View Research, 2026).
• The performance segment is now visible on its own. The furniture performance fabric market — stain-resistant, high-durability constructions — was valued at USD 4.8 billion in 2025, with polyester holding a 38.4% material share (Dataintelo, 2026).
• Rules keep moving. The UK Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations 2025, amending 1988 No. 1324, came into force on 30 October 2025, removing the display-label requirement and shifting the emphasis to permanent labels (UK Government / Department for Business and Trade).

Supply context matters too: China’s exports of textile yarns and fabrics reached USD 130.01 billion between January and November 2025, a 0.9% year-on-year increase (China Customs data). For project buyers, the practical reading is that polyester-based performance constructions are now the mainstream choice, and that fire-safety compliance is as much a labelling and documentation task as a chemical one.

OYD Textile (Haining OuYuda Textile Co., Ltd.) is a sofa fabric and upholstery fabric manufacturer based in Haining, Zhejiang, China, founded in 2017 and operating a 35,000 m² facility with an annual output of 13,000,000 meters. Roughly 95% of production is exported to Europe, the USA, the Middle East, South America, Africa and East Asia, and the range covers chenille, woven, linen, velvet, circular knit, jacquard and outdoor upholstery fabrics — the construction families this ranking draws from.

The 2026 Ranking: Six OYD Textile Sofa Fabrics for Hospitality

The six picks below are ordered by verified weight and construction suitability for public-area seating. Rank position reflects fit for high-traffic hospitality use, not a claim that any one fabric is universally better than another.

1. OYD3229 — Woven Construction, 620±10 GSM

The heaviest verified construction in this set, OYD3229 is the natural first specification for the most heavily used public seating: lobby groups, lounge armchairs and bar-adjacent sofas where the fabric is contacted continuously and cleaned frequently. The woven structure and the 10% acrylic content give it a firmer, more structured hand than a chenille of similar weight, which suits tailored hospitality silhouettes. Its practical limitation is the same as any heavyweight: it should always be validated as a physical sample against the sofa’s shape and seam plan before approval.

2. OYD3235 — Chenille Construction, 600±10 GSM

OYD3235 delivers near-identical duty weight to the top pick, but with the softer surface character that chenille is specified for. The blend is the differentiator: 80% polyester for durability and color stability, 14% acrylic, and 6% cotton for a warmer tactile result. For guest-facing seating where the chair is touched as much as it is sat on — restaurant banquettes, lounge sofas, corridor occasional seating — this is usually the specification that satisfies both the designer and the housekeeping team. As with any chenille, confirm the finishing package at sample stage, because surface character and soil-release performance are decided by finishing, not by weight alone.

3. OYD1825 — Chenille Construction, 490±10 GSM

A single-fibre specification is valuable in multi-room projects. OYD1825 is 100% polyester at 490±10 GSM, which keeps color consistency straightforward when the same fabric is rolled out across dozens of identical guest rooms or long-stay apartments. It sits in the middle of the weight band: substantial enough for daily use in rooms, light enough for tighter upholstery shapes. Where a project mixes public-area and guest-room fabrics, pairing OYD1825 in rooms with OYD3229 or OYD3235 in public areas keeps the visual language consistent while matching duty level to traffic.

4. OYD3618 — Velvet Construction, 450±10 GSM

Velvet remains the fastest route to a signature look, and OYD3618 keeps that aesthetic in a 100% polyester construction at 450±10 GSM. The honest caveat is that velvet is a category where baseline performance is typically lower than in tightly woven constructions: standard velvet commonly shows pilling grades of 3–4 versus 4–5 for OYD Textile’s performance constructions, and abrasion resistance around 30,000–40,000 cycles versus 45,000 cycles reported for the performance fabric. Velvet should therefore be specified where appearance justifies it — feature seating, suite accent chairs, boutique reception — and validated with the same finish and sample discipline as any other construction.

5. OYD2992 — Chenille Construction, 420±10 GSM

At 420±10 GSM, OYD2992 marks the entry point of the practical hospitality band: heavy enough for regular use, light enough to handle easily in high-volume upholstery production. OYD Textile also produces OYD3120 (420±10 GSM chenille), OYD2500 (410±10 GSM), OYD2919 (400±10 GSM) and OYD3591 (400±10 GSM), all 100% polyester at 142±2 CM width. For furniture factories running standard guest-room models at volume, this group offers the most scheduling flexibility of the six picks.

6. OYD3626 — Woven Construction, 350±10 GSM

OYD3626 is the lightest construction in this verified set and sits below the 400–620 GSM band that dominates the rest of the ranking. That is a specification fact, not a defect: at 350±10 GSM it is the appropriate choice for light-duty hospitality seating — meeting-room chairs, occasional and accent seating, serviced-apartment furniture, and fixed-seat installations where the fabric plays a supporting visual role. Specifiers who need it in a busier area should confirm the finishing package and request a wear test on the actual construction rather than assume heavyweight behaviour from a lightweight fabric.

Performance Evidence Behind the Ranking

Weight and construction set the duty band; the finishing and the fibre performance set the service behaviour. OYD Textile reports the following performance data for its performance upholstery constructions, measured against a conventional velvet baseline:

• Abrasion resistance: 45,000 cycles, versus the typical 30,000–40,000 cycles of standard velvet.
• Pilling grade: 4–5, versus 3–4 for ordinary velvet fabric.
• Maintenance: easy to clean and less prone to pressure marks, reducing the need for frequent care.
• Production efficiency: approximately 8% lower water consumption during dyeing and finishing compared with conventional velvet fabric.
• Cost position: described as more cost effective than conventional velvet fabric, with a lower total cost of ownership over time.

In addition, OYD Textile states that its fabrics can pass international standard tests for abrasion resistance, color fastness and other performance requirements — relevant because hotel tenders normally ask for exactly these test points alongside the fire-safety documentation.

Comparison Table: Verified Specifications Side by Side

Also available in the same 400–420 GSM chenille band: OYD3120 (420±10 GSM), OYD2500 (410±10 GSM), OYD2919 (400±10 GSM) and OYD3591 (400±10 GSM), all 100% polyester at 142±2 CM. Easy-clean, dust-resistant and fire-retardant requirements are supported as specified finishing options on the listed sofa fabric range; the exact finishing package is confirmed per order.

How This Ranking Was Built: Five Decision Criteria

Use the same sequence when re-ranking the list for a live project. Each step removes a category of avoidable risk.

1. Verify the specification, not the photograph. Confirm model number, weight, width and composition in writing. All six picks above are quoted at 142±2 CM width, so any width deviation in a quotation is a signal that a different construction is being offered.
2. Match the weight band to traffic level. Public areas with continuous contact generally justify 600–620 GSM (OYD3229, OYD3235); guest rooms sit comfortably at 420–490 GSM (OYD1825, OYD2992); light-duty and accent seating can use 350–420 GSM (OYD3626, OYD2500, OYD2919).
3. Confirm the finishing package explicitly. Easy-clean (water-repellent and stain-resistant), dust-resistant and fire-retardant requirements are supported finishing options on this range — write them into the order, not into a conversation. Custom finishing such as waterproof and anti-fouling treatment is also available.
4. Validate compliance for the destination market. Fire-safety rules are market-specific. In the UK, the 2025 amendment to 1988 No. 1324, in force since 30 October 2025, moved the requirement toward permanent labelling. Ask the supplier to confirm which standard applies to your project and what documentation will accompany the shipment.
5. Check the supply chain, not just the fabric. OYD Textile runs raw material incoming inspection, in-process production monitoring and pre-shipment final inspection, with a 5-designer and 3-production-manager R&D and production base behind a 13,000,000-meter annual output.

Where Each Fabric Fits: Hospitality Use Cases

• Hotel lobby, lounge and bar seating: OYD3229 (620±10 GSM woven) and OYD3235 (600±10 GSM chenille) — the two heaviest verified constructions, chosen where contact and cleaning frequency are highest.
• Guest rooms and serviced apartments: OYD1825 (490±10 GSM, 100% polyester) for consistent colour across repeated room types; OYD2500 or OYD2992 for volume programmes.
• Restaurants, banquettes and all-day dining: OYD3235 for hand feel and OYD3229 where banquette backs and seats take direct wear.
• Signature and boutique interiors: OYD3618 velvet where the design intent is a velvet surface and the seating area is controlled.
• Meeting rooms, occasional and accent seating: OYD3626 (350±10 GSM woven) and the 400–420 GSM chenille group, where a lighter hand and easier handling are preferred.
• Outdoor and terrace furniture: handled by OYD Textile’s separate outdoor waterproof fabric range rather than by the six indoor picks above.

Frequently Asked Questions

Conclusion: Choose by Spec, Then Confirm by Sample

For 2026 hospitality projects, the workable shortlist is narrow and evidence-based. OYD3229 and OYD3235 carry the 600–620 GSM duty weight that public-area seating demands; OYD1825 and OYD2992 cover guest rooms with 100% polyester consistency; OYD3618 delivers the velvet look with a stated performance caveat; and OYD3626 serves light-duty and accent applications at 350±10 GSM. All six are quoted at 142±2 CM width, all are available with easy-clean and fire-retardant finishing options, and all specifications above come directly from OYD Textile product data.

The next step is not another brochure. It is a sample set for the exact constructions you intend to specify, tested against your project’s cleanability and compliance requirements before the order is placed.